SYSTEMS/HPE
[Best Performance] HPE Cray Supercomputing XD670
CRAY KOREA Blog
2024. 4. 5. 17:04
1. HPE Cray XD670 User Guide Best Performance
# | Parameter | Best Performance | BIOS Default Setting |
1 | SNC | Enable SNC4 (4-clusters) | Auto |
2 | Stale AtoS | Enable | Auto |
3 | LLC dead line alloc | Disable | Enable |
4 | Enforce DDR Memory Frequency POR | Disable | POR |
5 | Patrol Scrub | Disabled | Enable at End of POST |
6 | Enable Monitor MWAIT | Enable | Auto |
7 | CPU C6 report | Disable | Auto |
8 | Enhanced Halt State (C1E) | Disable | Enable |
9 | Package C State | C0/C1 state | Auto |
10 | Power Performance Tuning | BIOS Controls EPB | OS Controls EPB |
11 | ENERGY_PERF_BIAS_CFG mode | Performance | Balanced Performance |
12 | Memory Frequency | 4800 | Auto |
13 | Power Policy Quick Settings | Best Performance | Standard |
- 참고: https://support.hpe.com/connect/s/product?language=ko&cep=on&kmpmoid=1014737116
2. Turbo boost
(1) BIOS Options
Chipset > Advanced Management Configuration > Hardware PM State Control > Hardware P-States > "Native Mode" Chipset > Advanced Management Configuration > CPU P state control > SpeedStep > Enable Chipset > Advanced Management Configuration > CPU P state control > SpeedStep > Turbo Mode > Enable |
(2) OS performance mode 적용 확인
# /usr/bin/cpupower frequency-info analyzing CPU 0: driver: intel_pstate CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: Cannot determine or is not supported. hardware limits: 800 MHz - 3.80 GHz available cpufreq governors: performance powersave current policy: frequency should be within 800 MHz and 3.80 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency: Unable to call hardware current CPU frequency: 3.10 GHz (asserted by call to kernel) boost state support: Supported: yes Active: yes |